www.safemag.ru User Manual Video Door Phone CDV-40N • • Thank Thank you you for for purchasing purchasing COMMAX COMMAX products. products. • • Please Please carefully carefully read read this this User’s User’s Guide Guide (in (in particular, particular, precautions precautions for for safety) safety) before before using usingaaproduct productand andfollow follow instructions instructions to to use use aa product product exactly. exactly.
www.safemag.ru Table of contents 1. Greetings ................................................................................................. 1 2. Warnings and caution.............................................................................. 2 3. Part names and functions......................................................................... 4 4. Operating ................................................................................................. 5 5. Installation .............................
www.safemag.ru 2. Warnings and caution Please follow the things described below in order to prevent any danger or property damage. Warning Prohibition. It may cause a serious damage or injury if violated. No disassembly No touch Caution Must follow strictly. Shows plugging out the power cord without an exception It may cause a minor damage or injury if violated. Shows the warning and caution for an electric shock. Shows the warning and caution for a fire.
www.safemag.ru Cleaning & Use Warning Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed. ·It may cause an electric shock or fire. If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center. ·It may cause an electric shock or fire. Please don’t insert any metallic or burnable materials into the ventilation hole. ·It may cause an electric shock or fire.
www.safemag.ru 3. Part names and functions ⑤ ② ④ ⑬ ⑥ ⑦ ① ⑧ ③ ⑨ ⑫ ⑩ ⑪ No. Name Description 1 BRIGHT button Adjust brightness 2 COLOR button Adjust color 3 CONT button Adjust contrast 4 RESET button Returned to default color/brightness/Contrast 5 Handset Handset 6 Screen LCD screen 7 Monitoring / UP button 8 Interphone call 1. Press this button to check the entrance status 2. Press this button to adjust BRIGHT / COLOR / CONT Pick up the handset and call 1.
www.safemag.ru 4. Operating 1. Calling of visitor The visitor presses the call button on the camera The visitor’ s image appears on the monitor A chime sounds Open the door The door release function operates only when the visitor’s image is displayed on the screen Dialog begins Dialog duration 60 seconds at a time A view of the front door can be seen anytime the entrance button is pressed and a dialog can be made with anyone at the front door.
www.safemag.ru 3. BRIGHT / COLOR / CONT setting (Available only in Monitoring status) 1). BRIGHT setting ① Press Monitoring button when the handset is hung on properly. (LED Blinking) ② Press BRIGHT button on the left while the screen is turned on. (Beep sound once) ③ Power LED is blinked as fast (BRIGHT control mode) ④ Adjust the Brightness as the user wants by pressing UP / DOWN button ⑤ Press the BRIGHT button to save the new setting when the setting is over. (Beep Beep sound) 2).
www.safemag.ru 5. Installation 1. Installation Method of camera monitor Note ① Avoid the range of direct sunlight ② Recommended height is pertinent from 1450 ~ 1500mm ③ Avoid the installation near magnetic activity, humid temperatures and gas 2. Installation Method of camera Note ① Do not install the camera where it is exposed to Direct sunlight ② Keep cleaning up its lens to capture good views. SCREW T4X18(2EA) SCREW M3X8(1EA) DRC-40CK 7 www.safemag.
www.safemag.ru 6. Wiring 1. Camera connector polarity ① Red: Voice ② Blue: GND ③ Yellow: Power (+12V) ④ White: Video 2. Wiring precautions 1) If high voltage cables are present in the vicinity, use a coaxial cable with metal outer casing. 2) If any internal wires are exposed through mis-wiring, it may cause a short and become a cause of malfunction or fire. 3) When connecting the monitor and camera, please make sure that the monitor power is off.
www.safemag.ru 7. Parts List Bracket for wall mount Manual Body of CDV-40N T4 X 18(4EA) Screw for wall mount M3 X 6(1EA) Screw for body 4P Connector (2EA) 8. Miscellaneous ● Please carefully read this User's Guide before calling service man After checking the entire check list, please contact customer service center. We will do our best to make you satisfy with our services. 9.
www.safemag.ru 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM0740N00010 Printed In Korea / 2011.03.104 www.safemag.
