User Manual COLOR VIDEO DOOR PHONE CDV-71BE/D 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com Printed In Korea / 2010.0 4.101 • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
Warnings and caution Make sure to follow the instructions to prevent any danger or property losses. It indicates prohibition. Warning Death or serious injury is expected. It indicates prohibition of disassembly. It indicates prohibition of contact. It indicates dos and don’ts. It indicates that the plug should be pulled out from the socket. Warning 1 Do not put the plug in the socket simultaneously. It may generate abnormal heat or cause a fire. Do not connect to other products while in use.
Warnings and caution It indicates prohibition. Caution An injury or property losses are expected It indicates prohibition of disassembly. It indicates prohibition of contact. It indicates dos and don’ts. It indicates that the plug should be pulled out from the socket. aution If the socket holes are larger than normal, do not put the plug. It may cause an electric shock or a fire. Make sure that dust or foreign substances are not gathered on the product.
Table of contents 1. Name of Parts 4 2. Features and Main Function 5 3. Package 5 4. System Layout 6 5. Wiring Diagram 7 6. Installation Method 8 7. Operating Description 9 8.
1. Name of parts No.
2. Features and Main Function 1. Features 7" Wide TFT-LCD Surface mount type installation method FREE VOLTAGE power supply Menu control by on screen display 2. Main function Communicate between Front door camera and CDV-71BE Interphone call and talk function Image storing (128 cut) function Door Open function CCTV Camera availble 4 Door unit & 1 Interphone connectable0 3.
4. System Layout Sub camera □ □ Camera: 4 units (Max) Sub phone: 1 unit □ CCTV Camera Wiring Camera : 30M(at Ø0.5mm) / 50M(at Ø0.65mm) / 70M(at Ø0.8mm) / 115M(atØ1.0mm) Sub interphone : 30M(at Ø0.65mm) / 50M(at Ø0.
5. Wiring Diagram # ①Red: Voice # ②Blue: GND # ③Yellow: +12V # ④White: Video 2 or CCTV Camera wiring diagram Please connect CCTV camera to one of the 4 channels CCTV CAMERA need additional power source . Please select wires depending on installation situation.
6. Installation Method □ Installation method of monitor 55。 75。 Notes for installing □ □ □ □ Please keep the product away from magnetism, severe moisture, direct sun rays and nearby heater, which may influence on the product Suitable height for main unit is 1450 ~ 1500mm from the bottom to the screen. Please arrange the handset after installation is completed Installation method of camera Please keep the product away from direct sun rays or strong reflected light.
7. Operating Description 1. Visitor Call & Monitoring □ When you push the [CALL] button on Camera, you can hear the chime sound from the monitor, sub-interphone, and Camera No. as well as visitor's picture will be shown on a screen.(Duration of on-screen : 30 sec) You can pick up the handset if you want to talk. If the screen is off while you're talking, you can push [MONITOR] button in order to speak again.
3.Picture Memory 3-1 Recording Manual □ While you are monitoring outside the house with CDV-71BE or talking though door phone, you can press the [REC./DEL.] button to save 1 cut of picture thru the door camera or CCTV camera. 3-2 Auto recording Record a visitor picture on the memory of CDV-71BE when you set the units on AWAY mode. □ Press [REC./DEL.] button before moving green box "ON" and then press [↲].
□ □ You can select one of the 6 images of visitors picture recorded on screen using the [UP▲]/ [DOWN▼] and [LEFT◀/ [RIGHT▶] buttons, Press [ ↲] button after moving the red bar to the image you want to enlarge. 2007-01-23 11 12 33 1-1/4 Press [LEFT◀]/[RIGHT▶] button, you can see the pictures enlarged in order. Press [REVIEW] button to turn on stand by mode.
6.
7. Camera Setting It is connectable 4 cameras max In this menu, you can select the number of cameras that can be used, even connected or disconnected. □ The following picture will be shown with pressing [↲] button for over 3 seconds in stand-by status of screen off. □ □ CAM1 CAM2 CAM3 CAM4 UP D0WN RIGHT: ACT ENT: SET You may change the activation of each camera pressing [RIGHT¢π] button where you want. Green box status stands for camera in use and Red box status stands for camera not in use.
8. Specification ITEM Wiring number Rated voltage CDV-71BE Camera : 4 lines in polarity, Sub interphone : 4 lines in polarity AC100-240V~, 50/60Hz Power consumption (On operating) 25W (Max.) Display unit 7" TFT-LCD Call sound Door(individual door):ring electronic chime 3 sounds twice repeatedly, Interphone :electronic melody sound Image receiving time 30sec (On calling 60sec) Memory 128cut Communication distance Door camera: 50m(at Ø0.65mm) / 70m(at Ø0.8mm) / 115m(atØ1.
