Specifications

14 15
This DECT phone has various functions from a normal DECT phone.
 Door Call
When you receive a call from door, pick up the DECT Phone from the adaptor and press
the TALK button and you can talk, To end the talk, put down the DECT Phone to the
adaptor or push the PAUSE button.
 Door open
When you are making a call with door, if you push the No. 0 button, the door will open
 Interphone call
It is not possible to call to other room using the DECT phone
 Receiving an Incoming Door or Interphone Call While Talking on the Phone
In case of receiving a door call or interphone call while already taking another call,
you can hear another ringing sound in the handset. If you want to receive the incoming call,
push the PAUSE button to end the previous call and push the TAIK button to receive a new call.
 Receiving an Incoming Phone Call while Talking with the Door Camera or Interphone.
You can hear another ringing sound in the handset. If you want to receive the another
telephone call, push the PAUSE button to end the previous call and push the TAIK button
to receive a new call.
Because the DECT phone needs more time to analyze ring signals,
it takes some more time to receive/make a call.
3) Connecting the Main Unit and the DECT Phone

1) Burglar function
 Press the MENU/SET button and move to Burglar mode using the
button and ENT button.
[Interphone]
[
ROOM 01]
ROOM 02
ROOM 03
ROOM 04
: Move page
: Select Room
ENT : Calling Room
INTERPHONE : Turn off
[Interphone]
ROOM 01
ROOM 02
ROOM 03
ROOM 04
: Move page
: Select Room
ENT : ID set
MENU/ SET : Return
[Interphone]
ROOM 01
ROOM 02
[ROOM 03
]
ROOM 04
: Move page
: Select Room
ENT : 10Set
INTERPHONE : Return
 Use the Right( ) button and then select a setting using the SET(Y) button and cancel
(N) button and push the ENT button to exit the MENU.
It is possible only when all magnetic switches connected to main unit are closed
(holding time : 60sec)
OSD : [Burglar Y or N]
If Y is selected for setting, the red security light will flash in the upper side.
If there is a security problem is happened after completing all Burglar function setting,
there will be certain holding time and a siren alarm will be made with OSD message.
(Holding time to release : 30 seconds)
OSD : [WARNING! INVASION]
 To release, press the ENT button according to OSD MENU
 The restore is available only when all magnetic switches connected to main unit is closed
2) ROOM ID setting
 After getting in the ROOM ID mode using the MENU/SET button and placing the
mark on required room number and push the ENT button to get out from the MENU.
3) Interphone Pause
 After selecting the INTERPHONE PAUSE mode use the MENU/SET button
and select the SET(Y) button and cancel (N) button and push the ENT button to
get out from the MENU.
OSD : [Interphone pause Y or N]