Specifications

12 13

1) Door Answering & Monitoring
2) Interphone
 When you push the CALL button on camera, you can hear the chime sound from
the monitor and visitor
s image will be shown on a screen
OSD : [Cam1 call] * Duration of on-screen: 30 Seconds
 To talk to visitor, push the TALK button and then you can talk in the hands-free mode.
 If you pick up the handset, you can talk with the visitor through the handset.
OSD : [Cam1 call talk] * Duration of talking: 1 minute
 To see the condition of door in standby, press the MONITOR button and
if you push the RIGHT(
), to see the screen of the next camera.
At this time, if you do not set the camera connection in the deep switch of main unit,
the camera channel will be passed.
 While you are talking and monitoring, push the OPEN button to open. OSD : [Cam1 talk open]
 While you are talking and monitoring with door camera, push the REC/ IMAGE button
and 1 image will be taken. OSD : [Cam1 talk rec]
 While talking in hands-free mode, push the MONITOR button to end the talk with door camera.
While talking through the handset, hang up the handset to end the talk with door camera.
 If you push the INTERPHONE button,
each room ID will be shown in the form of [Room#] as below.
This function is to call to other room unit and talk with other room unit.
 After placing an arrow mark on the certain room number using the UP/DOWN button,
the ring sound will be heard in the room.
 If you push the TALK button or pick up the phone, you can talk with other room.
Each room number has its own registration (ie. ROOM 1) and can not call to itself.
Interphone Pause In case of calling to reject a set room number,
Interphone Pause will be shown
OSD : [Interphone pause Room#]
 If you push the ENTER button, the call chime sound will be heard in the called room.
OSD : [Call Room02] Room : [Call from Room01]
[Interphone]
ROOM 01
ROOM 02
ROOM 03
ROOM 04
: Move page
: Select Room
ENT : Calling Room
INTERPHONE : Turn off