Specifications

- 58 -

5.8 Saving/Loading Parameters
5.8.1 Saving Parameters
① From the “Project” menu in the setup software select “Save As Project” opens a window “Save As Project”.
② Enter a project name.
③ Click “Save”.
Files will be saved to the default folder “C:/Melservo/setup221/*project name*
(If the path is changed then, the files will be saved to the new path /*project name*)
Files Saved

device.prd I/O signal device selection parameters setting file
paramet.prm Settings files for parameters PA, PB, PC, PD and PE
project.prj Project information file
point.ptbn Point table data file.
(Files will not be created in position control mode (pulse input))

* Note Always upload current parameters from the driver to the software before saving.
(See“LECSA Operation Manual (Simplified Edition)”,section 5.2.6 for uploading.)












①
②
③
②