Owner`s manual

97
7 PABX Configuration using the web interface
Your PABX (Phone System) can be completely configured via the
web management system.
The web management Welcome page contain a link to Basic PABX
Settings, which are the configuration options that the user will most
likely wish to change.
The Basic PABX Settings are:
- Incoming Ringing
- Station Names
- Outgoing Restriction
- Station Class of Service
- Cordless Registration
- Line Forwarding
Instruction for setting these basic options are given below.
Additional instructions are also included for all other PABX
configuration options. These may be accessed by selecting PABX
Configuration from the main menu and then using the sub-menu
below to access individual functions.
Some programming changes require the system to be restarted. A
prompt, shown below, will appear on the left-hand side of the
screen. The Restart must be selected before you exit to ensure the
settings take effect.