Owner`s manual

86
Connecting to an External ADSL Modem, Cable Modem, LAN,
WAN or add a host to the DMZ
The WAN/DMZ port can be used to connect to an external
ADSL modem, a LAN or a WAN, or to add a host to the DMZ.
1. Select Router Configuration from the main menu
2. Select WAN/DMZ Port from the sub-menu. The following
screen is displayed:
3. Select the Change the WAN/DMZ settings here. The
following screen is displayed
Three options are presented.
- PPPoE
- IP Gateway
- DMZ.
PPPoE to connect to an external ADSL modem
PPPoE is used when connecting to an external ADSL modem.
As the Commander Pulse is equipped with an ADSL modem
we recommend that the internal modem be used rather than an
external ADSL modem. In this case go to ASDL Modem
configuration on page 76. If you wish to use the external ADSL
modem proceed as follows: