Owner`s manual

3. Click in each box and type the relevant address information provided

by your ISP.

4. Click “Next>”. The following page is displayed:

5. Select the Option provided by your ISP. The following page is

displayed: -

6. Enter the VPI and VCI values supplied by your ISP

7. Click “Next>”. The following page is displayed: -

This page confirms the address settings that you have manually

configured (the values displayed above are for example purposes

only). If you selected the Manual option at step 5, the VPI and VCI

values that you entered are also displayed on this page.

8. If you are happy with your settings, click “Confirm Changes”. The

Internet Access page is displayed and your configuration is complete.