Owner`s manual

80
6. Click “Next>”. The following page is displayed:
The settings of VPI=8 and VCI=35 are the default settings. If your ISP
has supplied you with different values enter them here.
7. Click “Next>”. The following page is displayed:
This page confirms your PPPoE settings.
8. If you are happy with your settings, click “Confirm Changes”. The
Internet Access page is displayed.
As you have configured PPPoE Internet access, notice that an extra
configuration option called MAC Spoofing appears on this page:
MAC spoofing allows you to set the Media Access Control (MAC) address
of your Commander Pulse. See Enabling MAC spoofing below for more
details.