Owner`s manual
74
To change the greeting on the Answering machine
1. Press the MESSAGE Key.
2. Select “Answering machine” or dial 9 as the station number
3. Enter your Voicemail Password, (1111 by default), followed by #.
4. You are presented with the Voice Messaging Control Menu. The
options displayed are ‘Play’, ‘Erase all messages’, ‘Greeting’, ‘Change
Password’, ‘Monitor’ and ‘Cancel’.
5. Select ‘Greeting’.
6. Select ‘Record greeting’
7. Speak to record a personalized greeting when prompted.
8. Press ‘Confirm’ when finished the greeting.
9. Press the Hands-free Key to finish programming.
To set the time a call will ring before the Answering machine answers
- For configuration via the keystation interface, see page
171.
- For configuration via the Web Interface see Page 112
Programming Additional System Options
Using a Door station
You can equip your Commander Pulse with a Door station. The Door
station has a button which, when pressed, rings at programmed stations. It
has a microphone and speaker for communication. With a Door station
fitted in your reception area, anyone visiting your premises can call when
they arrive and you can speak to them before you let them in.
Your Commander Pulse also features a Doorstrike relay output, which can
be used to operate a Doorstrike mechanism, to allow you open the door
from your station. You must purchase the Doorstrike mechanism yourself
and arrange for a qualified electrician to install it.
- For configuration via the web interface, see page 100.
- For configuration via the keystation interface, see page
172.
Answering a Door station call
You can answer a Door station call if your station is programmed to ring
when someone calls at the Door station.
- To answer a door station call, lift the handset and speak.
There is no code to dial.
A station cannot make a call to a door station
To open a door using the Doorstrike
1. When your station is ringing with a Door station call, and
you have a Doorstrike mechanism installed, the option
‘Open the door’ will be displayed.
2. Select ‘Open the Door’. The Doorstrike relay will operate
and the call to the Door station will be disconnected.
From a standard telephone, the code is Forward Recall 731 if you are on a
call and 731 if you are not.