Owner`s manual

63
Sending a Forward Recall while on call
A Forward Recall signal may be required if you are using certain network
services on your PSTN lines, or if your Commander Pulse is connected to
another telephone system (PABX) via one of the line interfaces.
The Forward Recall feature allows you to send a hold signal forward on
the line to the exchange or PABX. To send a hold signal, you must be on
a call or have dialed at least one digit of the number you are calling.
To send a Forward Recall signal to an exchange or a PABX
From a keystation, select ‘Forward recall’ on the display.
From a standard telephone, the code is Recall 722.