Owner`s manual

1 Introduction

Congratulations on becoming the owner of the Commander

Pulse combined voice & data communications system. You will

now be able to access the Internet using your high-speed DSL

connection, share your phone connection between fixed &

cordless handsets

This User Guide will show you how to connect Commander

Pulse gateway, and how to customize its configuration to get

the most out of your new product.

Important Safety instructions

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk of fire,

electric shock, and injury to persons, including the following:

• Read and understand all instructions.

• Follow all warnings and instructions marked on the product.

• Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

• Do not use this product near water (for example, in a wet

basement).

• Do not place this product on an unstable cart, stand, or

table. The product can fall, causing serious damage to the

product.

• Slots and openings in the cabinet and the back or bottom

are provided for ventilation, to protect it from overheating;

these openings must not be blocked or covered. This prod-

uct should never be placed near or over a radiator or heat

installation unless proper ventilation is provided.

• This product should be operated only from the type of

power source indicated in the manual. If you are not sure of

the type of power source to your building, consult your

dealer or local Power Company.

• The mains power socket outlet must be located near the

product and must be easily accessible to allow

plugging/unplugging.

• Do not allow anything to rest on the power cord. Do not

locate this product where persons walking on it will abuse

the cord.

• Do not use a station cord with this product’s AC power

cord. The AC outlet for this product should not be used for

any other electrical equipment.

• Never push objects of any kind into this product through

cabinet slots as they can touch dangerous voltage points or

short out parts that could result in a risk of fire or electric

shock. Never spill liquid of any kind on the product.