Owner`s manual

3. Select ‘Confirm’ to accept the number.

To set a 'Divert when Busy' from a standard phone the code is '733'

followed by the destination number.

WARNING

It is possible that an station may misuse the External Divert

facility. The default setting is that no station is allowed to set the

facility.

Note

When ‘Forward when busy’ is enabled on an station to Forward

to an external number, external incoming calls will divert but

internal calls will not.

Diverting an external call to an external number ties up two

exchange lines. Such calls are called trunk-to-trunk calls.

To cancel a forward when busy

1. From the Idle Menu, select ‘Station Divert’.

2. Select ‘Divert when busy’. The forwarding is automatically cancelled

and the display returns to the Idle Menu.

To forward calls when your station does not answer

The ‘Divert On No Answer’ allows you to forward all your calls to ring at

another station if there is no answer at your station after four rings.

Alternatively, you can forward all external calls to an external number if

your station has not answered after four rings. In this case, internal calls

will not be forwarded but will continue to ring your station.

1. From the Idle Menu, press the Scroll Down Key (Ô) until “Station

Divert” is displayed.

2. Select ‘“Divert on no answer”

3. Enter an internal number if you want to forward all your calls to

another station.

4. Enter 0 followed by an external number if you want to Divert external

calls to an external number.

5. Press ‘Confirm’ to accept the number.

WARNING

It is possible that an station may misuse the external forwarding

facility. The default setting is that no station is allowed to set the

facility.

Note

If ‘Divert On No Answer’ is enabled on an station to forward to an

external number, external incoming calls will divert, but internal

calls will not. Diverting an external call to an external number ties

up two exchange lines. Such calls are called trunk-to-trunk calls

Diverting an external call to an external number ties up two

exchange lines. Such calls are called trunk-to-trunk calls..

To cancel a Diverting on No Answer forwarding

1. From the Idle Menu, press the Scroll Down Key (Ô) until ‘Station

Divert’ is displayed

2. Select ‘Divert on no answer’. The diverting is automatically cancelled

and the display returns to the Idle Menu.