Owner`s manual

46
Keystation – Basic Call Features
Making and Answering Calls
Making an external call.
There are two basic modes of operation available for making external
calls. In the normal mode, which is the default, a line access digit (0) is
dialed to select a Line.
If Automatic Line selection (ALS) is programmed you do not enter ‘0’ the
line access code.
Making an external call in normal mode
- Press a Line Key to select a free line and when dial tone is returned
dial the external number.
- Dial 0, (to select an external line). When dial tone is returned dial the
external number.
Making an external call with Automatic Line selection programmed
- Press a Line Key to select a free line and when dial tone is returned
dial the external number.
- Lift the handset, or use a Hands-free Key, and dial the number. The
system automatically selects a free line and the number is dialed.
Making an external call in Pre-dial mode
If you do not lift the handset you may enter digits in Pre-dial mode by
dialing 0, followed by the external number in normal mode or dial the
external number when Automatic Line selection is programmed. Digits will
not be sent to line until you lift the handset, press the Hands-free key, or
select 'Dial' from the display.
You can edit the number you have entered prior to sending to the line,
by using the left-hand Keypad ‘Edit Key’, located below the keypad.
To make an internal call in normal mode
You can place an internal call in one of the following ways:
1. Select the ‘Internal Call’ option on the display and select the desired
station from the list
2. Dial the station number (20 – 23 or 31-34) and select 'Dial'..
Lift the handset and dial the station number.
The display will show the station number, or, if programmed, the station’s
name.
To make an internal call with Automatic Line selection programmed
1. Select the ‘Internal Call’ option on the display and select the desired
station from the list.
2. The display will show the station number, or, if programmed, the
station’s name