Owner`s manual

Making a call

Press

Dial the number you want to call. The number appears on the display and

is dialed.

Note

Call timer: The call timer shows the duration of your current call

on display.

Note

Out of range warning: If you move too far away from the base

Commander Pulse during a call, your phone will sound an alert

tone, and will flash. You need to move closer to the base

Commander Pulse or your call will be disconnected.

Note

Low battery warning: If your phone is almost out of battery

during a call, it will sound and alert tone. Place your phone on the

base Commander Pulse for charging as soon as possible or it

would turn off when it is out of battery. Placing the phone on the

base Commander Pulse for charging will end the current call.

Preparatory Dialing (Pre-Dial)

With pre-dial, you can see and edit the number you are calling on the

display before dialing it.

Enter the number you want to call. The number appears on the display.

Deleting digits: Press CLEAR to delete an incorrect digit. If you press

CLEAR on the last digit, your phone will return to standby.

To Dial the number Press

Saving a number from pre-dial

1. Enter the number in standby. The number appears on the display

2. Press SAVE.

Note

Memory Full: If the phonebook is full, FULL is displayed, and

then the phone returns to standby.

3. Enter the name for the record. You must enter a name.

4. Press

5. Edit the number for the record if necessary. You must enter a

number.

6. Press SAVE to confirm. The phone returns to standby.

End a call

Press or place the phone on the base unit or charger.

Answer a call

When you receive a call, the phone will ring and will flash in the display.

1. Press to answer the call.