Owner`s manual

41
To enter system programming
If your station is the Programming Station you have access to the system
programming options. If you select this option you will be prompted to
enter the System Programming Password. If this option is selected from
any other station the display will show ‘Programming Refused’. Again, the
default Programming station is station 20.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’ is
displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password to access system
programming (1111 in default).
Background music
This feature allows an station to have music played over the speaker of a
keystation while the station is idle. This background music is supplied only
if there is an external music source connected to the system. This
background music is disconnected as soon as the user goes off hook or a
call is presented to the station.
1. From your keystation, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘Background Music’ is displayed.
3. Select the required option – ‘Background music on’ or ‘Background
music off’.
4. Press the Hands-free Key to finish programming.