Owner`s manual

40
3. Select ‘Key programming’.
4. Press the Programmable Key to be programmed. A list of options
appears on the display.
5. Select the required feature to be programmed onto the key. Use the
Scroll Down Key (Ô) to scroll down to view the list of available
features. For example, to program the key with a speed dial number,
select the ‘Individual digits’ option
6. Press the Hands-free Key to finish programming.
Note
If you are programming the key to call an external number
remember to precede the number with a 0 to select the CO line
To turn on Headset Mode
You turn Headset mode on and off via the PROGRAM Key
1. From your keystation, press the PROGRAM Key
2. Select ‘Headset mode’.
3. Select the required option – ‘Turn headset on’ or ‘Turn headset off’.
Once selected, the display will show ‘Headset On’ or ‘Headset Off’
and then revert to the Idle Menu.
4. Press the Hands-free Key to finish programming. The options to Turn
headset On? And turn Headset Off? are shown on the Idle display.
The handset does not operate in Headset Mode.
To set a ringing tone on your keystation
You can select one of six ringing tones.
1. From your keystation, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘Ringing Options’ is displayed.
3. Select ‘Ringing options’.
4. Select ‘Tone 1’, ‘Tone 2’, ‘Tone 3’, ‘Tone 4’, ‘Tone 5’ or ‘Tone 6' which
will cause the selected tone to sound.
5. Select ‘Confirm’ to use the chosen tone. On the display ‘Ring type
set’ will appear and then the display will revert to the Idle Menu.
6. Press the Hands-free Key to finish programming.
To set the display contrast on your keystation
You may choose from four levels of display contrast.
1. From your keystation, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘Contrast Options’ is displayed.
3. Select ‘Contrast options’.
4. Select ‘Level 1’, ‘Level 2’, ‘Level 3’ or ‘Level 4’ to set a contrast option.
The prompt ‘Contrast set’ appears on the display.
5. Press the Hands-free Key to finish programming.