Owner`s manual

5 Using Your Commander Pulse Phone System

System Description

• The Commander Pulse is an Integrated Communications System

supporting all your voice & data needs.

• The Commander Pulse can accommodate 2 PSTN lines.

• The Commander Pulse system can accommodate 4 wired keystations

/ Standard phones, as well as 6 cordless sets.

• The Commander Pulse keystation has a simple-to-use menu-driven

interface.

• A door station is available that can be programmed to ring any station.

It is connected to Station 23. A doorstrike output is also provided for

activating an automatic door opener.

• External Music-on-Hold can also be used. This is provided using the

optional Music-on Hold module. If installed it is to be connected to an

station position (eg Station 20 to Station 23 only).

Introduction to your Commander Pulse Phones

There are four wired and four DECT handsets available on the

Commander Pulse.

The wired stations can be equipped with a keystation or standard

telephone.

The DECT stations are equipped with the proprietary Commander Pulse

DECT Handsets.

The proprietary keystation and DECT handsets are designed to simplify

the use of the system by providing integrated features on the stations.

Note

If a door station is installed it uses a wired station position (station 23) thus

reducing the wired telephones to three. See page 100 for instructions on

programming the door station.

Installing the External Music-on-Hold module also uses an station position. If

both are installed the number of available wired telephones is reduced to two.

See page 100 for instructions on programming the external Music on Hold

module.