Owner`s manual

Basic Router Configuration for a Cable Modem connection

If your Internet access is provided by a cable modem the

following programming is needed

1. Select Router Configuration from the main menu.

2. Select WAN/DMZ Port from the sub-menu. The following

screen is displayed:

Select the Change the WAN/DMZ settings here. The following

screen is displayed:

Select IP Gateway and Next. The following screen is displayed.

Two options are presented.

DHCP - automatically assigns IP addresses.

Static - allows the IP addresses to be entered manually.

If you have not been provided with a number of IP addresses

select DHCP.

Click Next. The following screen is displayed