Owner`s manual

27
Station Class of Service
The Class of Service feature allows the user to define barring
settings for each station connected to the system restricting that
station from making certain types of calls from the system.
The following restrictions can be defined on a per station basis:
• No Restrictions
• Restrict International
• Local Only
• Emergency Calls Only
• By default ALL stations can dial ALL destinations.
WARNING
The Apply button, at the end of the page, must be clicked before
the page is exited or any other link is selected for the changes to
take effect. The settings will be lost if this is not done.
Day and Night Mode
There are different settings for Day Mode and Night Mode. To
configure Day/Night mode see page 66
The Allowed and Restricted Codes
The Allowed & Restricted codes can be used to add greater
flexibility to the allowed and restricted codes.
For example, if you wanted to restrict all International calls,
except those to the UK (international code 001144...). In this
case place the station in Restrict International in the Class of
Service settings, and then set Allowed Codes to ON for the
station in question.
In the International table enter 0011 in Index 1 and in the
Allowed Codes list enter the dialing code for the UK (001144).
These settings allow the caller to dial 001144 but restrict all
other 0011 codes.
Similarly if you want restrict particular numbers enter them in the
Restricted Codes list and set the Restricted Codes ON for the
station.
Note
If ‘Emergency Only’ is set, Allowed and Restricted codes must be
OFF.