Owner`s manual

23
4 Basic programming using the Management
Application
The Commander Pulse includes a series of Web management
pages that provide an interface to the software installed on the
Commander Pulse. It enables you to configure the Commander
Pulse. By accessing the Management application through your
web browser from any PC connected to the Commander Pulse
via
the wired or wireless LAN.
Note
By default the Wireless network card in the Commander Pulse is
disabled. This is as a security measure to prevent unauthorized
access to the Commander Pulse. To turn the Wireless network
on, see Page 118.
Open a Web Browser such as Internet Explorer or similar on the
PC.
Go to the Management Application of your Commander Pulse
by entering the following address into the web browser,
http://192.168.1.1
The following Log In screen is displayed.
Enter your user name and password.
The first time you log into the program, use these defaults:
User Name:
admin
Password:
admin
Note
You can change the password at any time or you can configure
your Commander Pulse so that you do not need to enter a
password. See Password on page 90
1. Click OK. The Welcome page is displayed: