Owner`s manual

22
Door station
The door station is connected to station 23.
Connect the single pair from the door station to the AB
connections on station 23.
WARNING
Cabling must be installed by a qualified ACMA cabler.
The system must be programmed to recognize the door station
See page 172 for programming via a keystation and page 100
for configuration via the Web Management application.
Power Fail Telephone
Connect a standard analogue telephone to the Power Fail
connector. When the Commander Pulse is switched off the Line 1 is
switched through to this phone and you can make and receive calls
on it until the power is restored.
Mounting
screw
Door Station
bracket