Owner`s manual

179
To set system timers
You can set various timers from the Programming Station to suit
your requirements.
From the Programming Station, press the PROGRAM Key
1. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
2. Select ‘System programming’.
3. Enter the System Programming Password and select
‘System’.
4. Press the Scroll Down Key (Ô) until ‘Timers’ is displayed.
5. Select ‘Timers’
6. Select the required timer to be changed and enter the
duration. (See table below).
7. Confirm the new time.
Press the Hands-free Key to finish programming.
Timers Range Default setting
Recall on hold 001 – 1800 90 seconds
Recall on transfer 001 – 180 90 seconds
Forward on no answer 01 – 30 11 seconds
Open the door 01 – 30 5 seconds
Door station ring duration 01 – 30 30 seconds
Call park 001 – 600 180 seconds
Ringback time duration 01 – 30 30 seconds
Answer machine delay 01 – 30 10 seconds
Programmable message length 30 - 180 120 seconds
Notification delay 60-1800 900 seconds
Notification interval 60-900 300 seconds
Recall on Hold
This is the time that elapses before a call, which has been
placed on hold, rings back the station that put the call on hold.
Recall on transfer
This is the time that elapses before a call, which has been
transferred and not answered, rings back the station that
attempted the transfer.
Forward on no answer
This is the time that elapses before a call ringing at an station,
with ’Forward On No Answer’ set, is Forwarded.
Open the door
This is the time that the Doorstrike relay will remain open
following activation.
Door station ring duration
This is the time that stations will ring when the Door station is
pressed.