Owner`s manual

a. Connect the yellow LAN cable to the LAN connector on

your PC.

b. Connect the other end of the yellow cable to the

Commander Pulse.

c. Turn on your PC and open your web browser, (e.g.

Internet Explorer)

d. Type in the web address of http://192.168.1.1 into your

web browsers address line and press enter.

Continue with programming as described on Page 23

Cabling Keystations & Standard telephones

Pulse keystations & Standard telephones can be connected

directly to the system using the telephone cord. If you wish to

locate the phone further away from the Commander Pulse

cabling must be installed by a qualified ACMA cabler.

WARNING

Cabling must be installed by a qualified ACMA cabler.