Owner`s manual

178
Button Hopping
When Button hopping is enabled if you press a second line key
while on a call on another line the first call is disconnected. With
button hopping off the first call is placed on hold when the
second line key is pressed.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘System’.
5. Press the Scroll Down Key (Ô) until ‘Button Hopping’ is
displayed.
6. Select Button hopping.
7. Select ‘Autohold’ or ‘Disconnect’
Autohold is set by default.