Owner`s manual

175
and its Voicemail Password will appear on the
display.
- If you selected ‘Answering machine’, the
Answering machine Password appears on the
display.
Press the Hands-free Key to finish programming.
To configure Line Key Lights
When a call is placed on System Hold, you can decide if the
associated Line Key Light is to flash or remain steady on all
other keystations. The default setting is that the light flashes.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘System’.
5. Press the Scroll Down Key (Ô) until ‘Line key light’ is
displayed.
6. Select ‘Line key light’
7. Choose either ‘Light flashing on hold’ or ‘Light steady on
hold’.
Press the Hands-free Key to finish programming.
To prohibit trunk-to-trunk calls on an station
You may prohibit individual stations from activating External
Divert, External Transfer and External Conference. (These
features set up so-called trunk-to-trunk calls).
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘External Diversion’ is
displayed and select.
6. Select ‘No trunk-to-trunk calls’.
7. Select the stations to be denied this feature. Those stations
denied the feature are indicated by a ♦.
Press the Hands-free Key to finish programming.
To Change ringing from 20 to 50 Hz
This option allows the ringing frequency to be changed from the
default 20Hz to 50 Hz on individual stations.
1. From the Programming Station, press the PROGRAM Key
2. Select ‘System programming’.
3. Enter the System Programming Password and select
'Stations'.