Owner`s manual

174
4. Enter the System Programming Password and select
‘Lines’.
5. Press the Scroll Down Key (Ô) until ‘Equipped Lines’ is
displayed.
6. Select ‘Equipped lines’.
7. Select the lines you wish to equip or unequip. Equipped
lines are denoted by a ♦. Unequipped lines are denoted by
a ◊.
Press the Hands-free Key to finish programming.
To configure disconnected stations
The system assumes that all available station interfaces have
Commander Pulses connected to them. If a station interface
does not have a Commander Pulse connected, ensure correct
system operation by disconnecting the station interface in
system programming, as follows
1. From the Programming station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Station disconnect’ is
displayed.
6. Select ‘Station disconnect’.
7. Select the stations you wish to connect or disconnect.
Disconnected stations are denoted by a ♦.
Press the Hands-free Key to finish programming.
Note
When a keystation is connected to a station interface that is
programmed as disconnected, the keystation display may appear
as if the keystation is connected. However, when the handset is
lifted a busy tone is heard and no options will be displayed.
To examine system passwords
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Examine passwords’ is
displayed.
6. Select ‘Examine passwords’.
7. Select either ‘Station lock password’, or ‘Voicemail
password’, or ‘System VM box’.
- If you selected ‘Station lock password’, the
station menu will appear. Select a station and
its Station Lock Password will appear on the
display.
- If you selected ‘Voicemail password’, the
station menu will appear. Select a station