Owner`s manual

172
Programming Additional System Options
Door station
To set up a Door station on your System
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘System’.
5. Select ‘Door station'.
6. Select ‘Door station equipped’.
Press the Hands-free Key to finish programming.
To program which stations can operate the Doorstrike
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Open door restriction’
is displayed.
6. Select ‘Open door restriction’.
7. Select which stations are restricted from opening the door.
The stations restricted from operating the Doorstrike will be
indicated with a ♦.
Press the Hands-free Key to finish programming.
External Forwarding Options
This allows you to decide if External callers or External and
internal Callers to your station are Forwarded externally if you
have set an external Forward. It also allows stations to be
prohibited from activating an external forwarding.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘External Diversion' is
displayed.
6. Select 'External Diversion'.
7. Select ‘No trunk to trunk calls’.
8. Select the stations that are not allowed to activate an
external forwarding or set up trunk to trunk calls.
If both internal and external calls are to be Diverted select 'All
calls'.