Owner`s manual

167
To allocate a Voice Mailbox to an station
1. From the Programming station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Voice Mail Boxes’ is
displayed.
6. Select ‘Voice Mail Boxes’
7. Enter the stations to be allocated a Voice Mailbox. Those
allocated a box will be indicated by a ♦.
Press the Hands-free Key to finish programming.
Remote Notification
Selecting the Stations that can activate remote notification
In default no station can set remote notification. Those stations
that can set remote notification are programmed in system
programming.
1. From the Programming station, press the PROGRAM
key.
2. Press the Scroll Down key (Ô) until “System Programming”
is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select
“Stations”.
5. Press the scroll down key until ‘Remote Notification’ is
shown
6. Select “Remote Notification”.
7. Select the stations that are to be allowed to use remote
notification .
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set
at 1 or 2.
1. From the Programming station, press the PROGRAM key.
2. Press the Scroll Down key (Ô) until “System Programming”
is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select
“System”.
5. Press the scroll down key until ‘Remote Notification is
shown
6. Select “Remote Notification”.
7. Select “Simultaneous Calls”.
8. Enter the value 1 or 2 and press “Confirm”.
9. The default value is set at 1.
Selecting the Number of Retry Attempts
The number of simultaneous remote notification calls can be set
at 1 or 2.
1. From the Programming station, press the PROGRAM key.
2. Press the Scroll Down key (Ô) until “System Programming”
is displayed.
3. Select “System Programming”.