Owner`s manual

166
4. Enter the System Programming Password and select
‘Stations’.
5. Press the scroll down key until ‘Restriction classes’ is
shown
6. Select ‘Restriction classes’.
7. Select ‘Night Class of Service’.
8. Select the Class you want to assign to the stations, (Class 1
– Class 6).
9. Enter the stations to be entered in this Class.
Press the Hands-free Key to finish programming.
To allow stations use System Speed Dials overriding call
restrictions
You may wish to allow stations to dial numbers entered in the
System Speed Dial list, which they are restricted from dialing
directly. For example, these could be numbers that stations in
Classes 2, 3 or 4 cannot dial directly. Entering these numbers
into the System Speed Dial list and activating this feature on the
stations allows the restricted stations to access these numbers.
By default, this feature is not activated on any station.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Sys. Speed no.
override’ is displayed.
6. Select ‘Sys. speed no. override’
7. Select the stations on which you wish to activate the
feature. Those stations allowed to dial System Speed Dial
numbers not normally appropriate to their Class of Service
are indicated by a ♦.
Press the Hands-free Key to finish programming.
Note
Numbers in an station’s Personal Speed Dial list cannot override
the Class of Service restriction of the station
Using Voicemail
Voicemail
Voicemail common parameters
All stations can be allocated voice boxes.
The maximum number of messages that can be stored in a
Mailbox is 20 at power up. This number is programmable from
10 to 50 messages.
The maximum message and Greeting length is programmable
between 60-180 seconds. The time allocated at Power Up is
120 seconds.
Unretrieved messages are deleted in 15 days and retrieved
messages are deleted in 3 days.
An station must be allocated a Voice Mailbox before it can use
voicemail. In default, stations are not allocated a Voice
Mailbox.