Owner`s manual

164
Assigning Station Names
You may assign names to stations. When an station receives
an internal call, its display will show the calling station name in
the place of the calling station number.
To assign a name to an station
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Select ‘Name programming’.
6. From the Station Menu, select the station you want to name
and enter the name as described on page 38. Up to ten
characters (including spaces) can be entered for each
name.
7. When the name is entered, select ‘Confirm’. You will be
presented with the Station Menu and can continue
programming other names.
Press the Hands-free Key to finish programming.
Class of Service
Each station may be programmed for a Class of Service. This
determines the type of call the station is allowed to dial. Four
tables, which can be programmed with up to fifty codes, are
used to implement six Classes of Service:
By default, all stations are in Class 1, that is, they have no
restriction placed on them.
An station placed in Class 2 is restricted from dialing the codes
programmed in Table 2. (Table 2 would typically be
programmed with the international access code 001).
An station placed in Class 3 is restricted from dialing the codes
programmed in Tables 2 and 3. (Table 3 would typically be
programmed with non-local national access codes).
An station placed in Class 4 is restricted to internal and
emergency, (000 and 106), calls only.
An station can be placed in Class 5 in addition to being in Class
2 or 3. In this case the codes programmed in Table 5 are
allowed.
An station can be placed in Class 6 in addition to being in Class
1, 2 or 3. In this case the codes programmed in Table 6 are
restricted.
The following table shows the types of restriction for the different
Classes of Service available:
Type of restriction Table Class
No restriction - 1
Restrict codes in Table 2 Table 2 2
Restrict codes in Table 2 and 3 Table 3 3
Internal and emergency calls only - 4
Allowed codes that can be combined with Class 2 or 3 Table 5 5
Restricted codes that can be combined Class 1, 2 or 3 Table 6 6