Owner`s manual

160
5. Press the Scroll Down Key (Ô) until ‘Tone protection’ is
displayed.
6. Select the stations you wish to allow receive Call Waiting
tones. A ◊ is displayed beside those stations allowed to
receive Call Waiting tones, and a ♦ is displayed beside
those stations protected against receiving Call Waiting
tones. (By default, all stations will have a ♦ displayed).
Press the Hands-free Key to finish programming.
To protect an individual call from Call Waiting tones
If your station can receive Call Waiting tones, you may protect
each call on an individual basis from interruption.
When you are on a call, select ‘Tone protect’ on the display.
From a standard telephone, the code is Forward Recall 725.
Incoming Call Handling
This option is used to allocate stations to answer incoming calls
on the lines.
Associating lines with stations for Incoming Ringing
By associating lines with stations you can have lines ringing
different stations in Day and Night modes.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
'Lines'
5. Select ‘Incoming Ringing’.
6. Select the line.
7. Select ‘Day’ or Night’.
The station menu is presented. Select the stations that are
to ring for calls on the line. A solid diamond, ♦, indicates
these stations.
Restricting Outgoing Calls
This feature lets you decide which lines each station can access
for outgoing calls. By default, all stations have access to all
lines.
To restrict an station from accessing a particular PSTN line
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Lines’.
5. Press the Scroll Down Key (Ô) until ‘Outgoing restriction’ is
displayed.
6. Select ‘Outgoing restriction’.
7. Select the line.
8. Select the stations to be prevented from accessing that line.
A ♦ is displayed alongside those stations that are restricted
from accessing the line, and a ◊ is displayed alongside
those stations that have access to the line.
Press the Hands-free Key to finish programming.