Owner`s manual

159
Least cost Routing activated automatically at set times
You can program the Least Cost Routing facility, to be
automatically turned on and off twice during a 24-hour period
enabling you to tailor your call charges through different service
providers.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Lines’.
5. Press the Scroll Down key until ‘LCR Timebands' is
displayed.
6. Select LCR on times
7. You can enter two 'On' times.
8. Select LCR off Times
9. You can enter two times at which the LCR facility is
deactivated
A Third option 'LCR weekend' is offered. When this is selected
the LCR service remains active from Friday night to Monday
morning, all off times over the weekend are ignored.
Press the Hands-free Key to finish programming.
To examine Station Lock Passwords
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Scroll down to ‘Examine passwords’
6. Select ‘Examine passwords’
7. Select ‘Station lock password’.
8. Select the station. The Lock Password is briefly displayed
on the top line of the display.
Press the Hands-free Key to finish programming.
Call Waiting Tone Protection
Stations may present a busy station with a Call Waiting tone,
provided the busy station is not protected against receiving Call
Waiting tones. By default, all stations are protected against
receiving Call Waiting tones. However, you may program
stations to receive Call Waiting tones.
To program an station to receive Call Waiting tones
1. From the Programming Station, select the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.