Owner`s manual

158
3. Select ‘System Programming’.
4. Enter the System Programming Password and select
‘System’
5. Scroll down until ‘Auto Line Selection is displayed’
6. Select Automatic Line selection and select ‘Automatic Line
selection On’.
Paging
To protect keystations against Announcements and Voice
Calls
By default, all keystations may be paged. You can page-protect
each keystation to prevent it from being paged from either
Announcements or Voice Calls.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Scroll down until ‘Page protection’ is displayed
6. Select ‘Page protection’
7. Select the stations you wish to protect. A ♦ is displayed
beside protected stations.
Press the Hands-free Key to finish programming.
Least Cost Routing
To set up codes to allow calls to be routed on specific lines or
networks
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Lines’.
5. Scroll Down and select ‘LCR Codes' .
6. Select LCR On to activate the facility
7. Enter in a code index (01-50).
8. Enter an input code (Up to 5 digits). Press Confirm. This is
the code dialed by the user.
9. Enter an Output Code (Up to 9 digits). This is the code that
will be inserted before the telephone number that the user
dials. This code can be used to select a specific Network
Provider.
10. Select the preferred or exclusive option.
If ‘Exclusive’ is selected the calls can only be sent on the lines
selected below.
If ‘Preferred’ is selected the calls will be routed on any available
line, if none of the selected lines are available. In this case the
output code is not dialed.
When Enabling or Disabling the LCR feature the new setting
does not take immediate affect. There can be a delay a of up to
1 minute for the setting to take affect.