Owner`s manual

157
9. Enter the caller telephone number.
10. Press ‘Confirm’.
11. Enter the name to be associated with the number. Refer to
page 38 for help on how to enter names.
12. Select the destination you wish to route calls from that
number to.
CND Lists – storing all calls or unanswered calls only
The system CND lists can store either all calls or unanswered
calls only.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System Programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘System’.
5. Press the Scroll Down Key (Ô) until ‘CND store’ is
displayed.
6. Select ‘CND store’.
7. Select ‘Store All Calls’ or ‘Store Unanswered Calls’.
Press the Hands-free Key to finish programming.
To set up stations with an individual CND List
You can program all twelve stations to store five numbers each.
Each of these stations will have a separate record of calls that
ring on exchange lines programmed to ring their stations only.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System Programming’
is displayed.
3. Select ‘System Programming’.
4. Enter the System Programming Password and select
‘Stations’.
5. Press the Scroll Down Key (Ô) until ‘Individual CND store’
is displayed.
6. Select ‘’ Individual CND store’.
7. Select the stations that you wish to have an individual CND
list. The stations with a Individual CND store have a ♦
displayed beside them.
Press the Hands-free Key to finish programming.
Automatic line selection
This facility allows users to make external calls without having to
enter the line access codes (0,8). Internal calls are made by
pressing Forward Recall and dialing the number when using
standard or cordless phones or selecting the number from the
internal call menu on a keystation.
1. From the Programming station , press the program key
2. Press the Scroll Down Key (Ô) until ‘System Programming’
is displayed.