Owner`s manual

156
5. If more than one caller is calling at any one time, the
number displayed will be that of the first call in the queue.
When this call is answered by one of the ringing keystations
the number of the next call in the queue will appear on the
displays of the other ringing keystations.
6. If your keystation is not ringing for the call you may examine
the incoming call ID by selecting ‘Examine I/C Call’. The
same information shown on the ringing keystations is then
displayed.
To set up your system to display caller numbers received on
PSTN lines (CND service)
If you subscribe to the Caller Number display service from your
Network Provider then you can program the system to display
the callers number.
1. From the Programming Station, press the PROGRAM Key
2. Press the Scroll Down Key (Ô) until ‘System programming’
is displayed.
3. Select ‘System programming’.
4. Enter the System Programming Password and select
‘Lines’.
5. Press the Scroll Down Key (Ô) until ‘PSTN Programming’ is
displayed.
6. Press the Scroll Down Key (Ô) until ‘CND Detection’ is
displayed.
7. Select ‘CND detection’.
8. Select the lines that have the CND service enabled. The
lines you select will have a ♦ displayed beside them.
Press the Hands-Free Key to finish programming.
To associate a caller number with a name, and route its calls to
an station
Up to a hundred names, each a maximum of ten characters,
(including spaces), may be associated with caller telephone
numbers. When a number with an associated name is
received, the name rather than the number is displayed.
1. Furthermore an station number may also be associated
with a telephone number. In this case an incoming call
from that number will ring at only that station..
2. From the Programming Station, press the PROGRAM Key
3. Press the Scroll Down Key (Ô) until ‘System Programming’
is displayed.
4. Select ‘System Programming’.
5. Enter the System Programming Password and select
‘Lines’.
6. Press the Scroll Down Key (Ô) until ‘CND Programming ’ is
displayed.
7. Select ‘CND Programming’.
8. Select an Index Number (01 - 30).