Owner`s manual

154
Two options are presented, Reset and Reset to Defaults.
Selecting - Reset invokes a reset but all the programming is
retained. - - - Resetting to defaults deletes most of the system
programming.
Note
If you reset your Commander Pulse to factory defaults, all
previous configuration changes that you have made are
overwritten by the factory default configuration.
This page reminds you that resetting to factory defaults cannot
be undone – any changes that you have made to the basic
settings will be replaced. If you are happy with this, click in the
Confirm box to tick it, then click Reset to Defaults. The following
page is displayed:
This page confirms that the Commander Pulse is currently
resetting to factory defaults. Once the reset is complete, Restart
page is displayed.
2. Click Restart. The following page is displayed.
Resetting to defaults also resets the username and password to
their default settings. When presented with the Log in page
enter the default username, ‘admin’ and the default password
‘admin’.