Owner`s manual

150
Firmware Update
The Firmware Update page allows you to:
• Backup and Restore configuration files for your system.
• Download an updated software version and install it on
your Commander Pulse
WARNING
It is recommended that the current programming of your system
be saved, using Save and Restore, prior to uploading the new
software. This allows you to restore the system configuration after
you have uploaded the new system software
About firmware versions
Firmware is a software program. It is stored as read-only
memory on your Commander Pulse. Your product manufacturer
s continually improving this firmware by adding new features to
it and these features are saved in later versions of the firmware.
Note
If there is a firmware update available you are strongly advised to
install it on your Commander Pulse to ensure that you take full
advantage of any new feature developments.
Backup/Restore Configuration
This page allows you to backup the configuration settings to
your computer, or restore configuration from your computer.
You should backup the system configuration before you upload
a new firmware version. This will ensure all programming
including speed dial lists etc are saved and can be restored
when the new version of software is uploaded.
To save the configuration to your PC select Backup. Allow a few
minutes for the file to be downloaded from the system.
Depending on the browser you are using you may be prompted
to allow the file to be downloaded. If so the following screen will
be displayed: