Owner`s manual

148
Remote Access
If requested to do so you can enable Remote access to allow
maintenance personnel to access the system remotely.
Select Remote Access from the left-hand side menu. The
following page is displayed: -
Your external IP address is shown. You provide this address to
the maintenance engineer, as this is the address they use to
access your system.
In order to make the access secure and prevent unwanted
access you also define a User Name and Password that you
supply to the maintenance engineer.
They will supply you with the IP address that they use to access
your system. You enter this in the IP address field.
This ensures that access is allowed from that IP address only
and is only allowed when the correct User Name and Password,
which you define, is provided.
There is also a time out on the access that is set at 30 minutes.
This can be increased or decreased as required.