Owner`s manual

13
Fit the Cable Cover over the phone connections.
Step 3 Internet Access Connections
Connecting to an ADSL Line
If you are connecting to the Internet via another modem (e.g.
iBurst, Cable modem etc) please proceed to “Connecting to an
External Modem” below.
If you are connecting to the Internet directly over an ADSL line
both the ADSL line and the PSTN Line provided with the ADSL
service should now be connected to the Commander Pulse.
Plug the other end of the Line 1 gray cable (already connected
to the Commander Pulse) into the phone socket on the splitter.
Plug one end of the violet ADSL cable into the ADSL socket on
the splitter.
Plug the ADSL filter into the telephone socket on the wall.
Plug the other end of the violet ADSL cable into the socket
labelled “DSL” at the back of the Commander Pulse.
Locate the lower pins first