Owner`s manual

138
- IP Protocol
- Direction, Inbound or Outbound
3. Select “Apply”
4. Save the new configuration
5. Restart the Commander Pulse
Host Validators
Traffic to or from specific hosts can be blocked by the firewall.
1. Select “Host Validators …” for a particular interface
The following screen is displayed
2. Select “Add Host Validator … ” for the selected interface
The following screen is displayed
3. Enter the host IP address and Subnet mask
4. Select the direction, “Inbound”, “Outbound” or “Both”
5. Select “Apply”
6. Save the new configuration
7. Restart the BROADBAND MODULE