Owner`s manual

135
3. Select an interface from the drop down list
4. Enter an IP address and subnet mask, or enter the first and
last IP addresses in the range
5. Select “Add Global Address Pool”
Reserved Mappings
Static routes can be defined between an external IP address
and internal IP addresses.
1. Select “Advanced NAT Configuration …”
2. Select “Add Reserved Mapping … ”
The following screen is displayed
3. Enter the following parameters:
Global IP address This is the public IP address assigned to the
WAN interface
Internal IP
Address
This is the internal IP address of the server on
the LAN
Transport Type Select a protocol from the drop down list
External Port
Range
A port or port range can be defined for the
external IP address
Internal Port
Range
A port or port range can be defined for the
internal IP address
4. Select “Add Reserved Mapping”