Owner`s manual

134
To change the security level
1. Select the required level from the drop-down menu
2. Select “Change Level”
NAT (Network Address Translation)
NAT is enabled by default on the three interfaces.
To disable NAT
From the main Firewall page select the option required
3. Select “Disable NAT to … (Interface)”
Restart the Commander Pulse for the change to take effect
Global Address Pools
A range of external IP addresses can be assigned to a specific
interface.
1. Select “Advanced NAT Configuration …”
The following screen is displayed
2. Select “Add Global Address Pool …”
The following screen is displayed.