Owner`s manual

130
Click on the Confirm Changes> button to apply the configuration
changes.
Wireless Network General Settings
The General Settings section of the Wireless Network page
displays details of the Commander Pulse’s current wireless
configuration. For example:
The hyperlinks in this section allow you to:
Enable/disable wireless networking; see page 118.
Change the channel currently in use; click Change your
wireless channel here… and follow the instructions in Select a
Channel on page 124.
Change the network name (SSID); click Change your wireless
network name here and follow the instructions on page 118.
Configure wireless security; click Change Wireless Security
settings here… and follow the instruction on page 120.
Configure address authentication; click Change which wireless
PCs are allowed to connect here… and follow the instructions in
Configure Wireless Address Authentication on page 125.
To display the information about the wireless PCs connected to
the Commander Pulse; see Displaying details of Wireless PCs
on page 131.