Owner`s manual

Wireless LAN range

The line of sight range between the Wireless LAN transmitter

and a wireless PC is 30m. This range is achieved in a perfect

environment with nothing between the Commander Pulse and

the PC. This range is reduced when used indoors by the factors

mentioned above.

Keystations location

The keystations have a 3m cord. This means that the

keystations can be up to 3 meters from the Commander Pulse

before additional telecommunications cabling is required. A

licensed ACMA cabler is required to install the cabling.

Step 2: Connect your telephones and PSTN Line(s)

Connect the wired telephones to the Unit

If your Commander Pulse has come with a Commander

Keystation please plug this into the socket labeled “Stn. 20” on

the back of the Commander Pulse. Otherwise plug your

standard phone into the “Stn. 20” socket

If you are installing additional wired telephones connect them to

the “Stn. 21” – “Stn. 23” sockets. If the phones are to be

installed in locations where cabling is required this cabling must

be done by a licensed ACMA cabler.

Plug in your PSTN Line(s)

Plug the gray phone line cable into to the Line 1 socket at the

back of the Commander Pulse unit. The other end of the gray

cord is to plugged in to the phone socket on the wall or the

ADSL filter. If you have a second line please plug the other gray

line cable into the Line 2 socket.

Plug Line 1

here

Plug line

2 here

Plug the gray

cord from the

keystation

here