Owner`s manual

126
Configuring the wireless PC blacklist
1. Once you have selected Allow all wireless PCs to connect
except those I specify radio button and then clicked Next>,
the following page is displayed:
2. To add a network PC to the blacklist, click Add an address
here… The following page is displayed:
3. Click in each box and type each character pair of the MAC
address for the PC you want to blacklist. Click Next>. The
following page is displayed, containing details of the MAC
address that you have just added:
This page allows you to configure the addresses on the
blacklist:
4. If you want to add another MAC address to the blacklist,
click “Add” an address here… and repeat the instructions
described in step 3.
5. If you want to remove a MAC address from the blacklist,
click “Remove” an address here… At the displayed page,
select the MAC address that you want to remove from the
drop-down list.
6. Click Next>.
If you are following the First Time Settings wizard, the final page
in the wizard sequence is displayed, which allows you to
Confirm Wireless network changes
If you have accessed this page from the General Settings
section of the Wireless Network page, click on the Confirm
Changes button to apply changes and return to the Wireless
Network page.