Owner`s manual

122
- If you want to use WEP 64bit data encryption, click on
the 64bit encryption on the wireless network radio button and
then click Next>. Now follow the instructions in Configuring 64bit
or 128bit encryption on page 123.
- If you want to use WEP 128bit data encryption, click on
the 128bit encryption on the wireless network radio button and
then click Next>. Now follow the instructions in Configuring 64bit
or 128bit encryption on page 123.
- If you want to use WPA, click on the Wi-Fi Protected
Access (WPA) on the wireless network radio button and then
click Next>. Now follow the instructions in Configuring WPA
security on page 124.
Disabling the Broadcast of the SSID Network Identifier
For additional security you can disable the broadcast of the
Network Identifier, SSID. Unticking the Enable SSID Broadcast
button on the Wireless security page does this. To connect to a
network that is not broadcasting the SSID it is necessary to
enter the SSID manually in the network connection properties in
the Control panel of your PC.