Owner`s manual

114

Edit LCR Codes

Using this page you may define the Least Cost Routing criteria.

Up to 50 LCR rules may be defined (Index 1 – 50).

In the ‘Input Code’ field you insert the relevant dialed digits (e.g.

‘0011’ for International calls or ‘0011’ for International calls to the

USA).

In the Output Code field, you insert whatever digits you want to

be passed to the network. If no additional carrier access codes

are required, then the Output Code is the same as the Input

Code.

If you require to enter an network operator specific access code

enter this before the relevant dialed digits in the ‘Output Code’

field. The ‘Output Code’ entered will be dialed automatically by

the system on front of the user dialed digits.

Preferred / Exclusive

In Preferred is selected then the system will, as a preference,

route the call using the line(s) which have been enabled for

each specific Input Code. However, if these line(s) are busy or

not-available, then the system will attempt to route the call over

any of the remaining system lines (i.e. those which are not

enabled for that specific Input code). If Exclusive is selected

then calls will only be dialled over the chosen lines.