Owner`s manual

113
Answering Machine
This is the time that elapses before an unanswered incoming
call is presented with the System voice mailbox greeting.
Voice Mail Message Length
This is the maximum length of a message left in a Mailbox or a
Greeting for a Mailbox, Auto Attendant or Courtesy service.
Remote Notification Delay
This is the delay between receiving a message in a voice
mailbox and setting up the remote notification call.
Remote notification Interval
This is the interval before setting up a second call if the first one
was unsuccessful.
LCR Programming
This feature can be used to ensure that certain calls are routed
over specific lines, or over a specific network provider, typically
to take advantage of optimal call charges for specific call types.
Edit LCR Programming
To set up the feature you associate dialed digits (Input Codes)
with the lines over which calls should be routed and with
whatever network codes (Output codes) are necessary to route
the call.
For example, if you wished all International (Input code = ‘0011’)
to be routed over Line 1, then you would associate Input Code
‘0011’ with Line 1
In addition, you may choose to route the calls over different
lines at various times of the day for optimum call rates.
The feature can be turned on permanently or activated at
particular times.
Once the facility is activated, calls are automatically routed over
the selected lines, and the network code (Output Code) is dialed
automatically on the line before the telephone number.
Use this Edit LCR Programming Page to Enable/Disable LCR
service and to set Start Times & Stop Times for service
activation.
To configure additional LCR parameters, see ‘To enter the
dialing codes and line selection, click here.’ on the Edit LCR
Programming page.