Owner`s manual

110
For each incoming line (Line 1 and 2, IP Trunk 1 & 2) you can
define what number to forward the call to for the cases of No
Reply, Busy & All Calls.
(See also PABX Configuration -> Station Settings -> Advanced
Options)
Class of Service
The Class of Service feature allows the user to define restriction
settings for each station connected to the system prohibiting the
station from making certain types of call.
The following restrictions can be defined per station:
- No Restrictions i.e. All calls are allowed
- Restrict International i.e. Prevent the station from
dialing calls beginning with the codes you enter in the
International table
- Local Only i.e. Prevent the station from dialing codes
you enter in the International AND National tables
- Emergency Calls Only i.e. The station can only dial 000
and 106. All other codes are restricted
By default ALL stations can dial ALL destinations.
Select the required setting for each station from the relevant
drop-down box.
By default ALL stations can dial ALL numbers.
The Allowed and Restricted Codes
The Allowed & Restricted codes can be used to add greater
flexibility to how you can configure the settings.
For example, if you wanted to restrict all International calls,
except those to the UK (international code 001144...). In this
case place the station in Restrict International in the Class of
Service settings, and then set Allowed Codes to ON for the
station in question.
In the International table enter 0011 in Index 1 and in the
Allowed Codes list enter the dialing code for the UK (001144).
These settings allow the caller to dial 001144 but restricts all
other 0011 codes.